SAMSUNG TABLET WON’T TURN ON: Basic Problems & Fixes

How to Fix a Samsung Tablet That won't Turn On
Image by Freepik

Power problems on our Samsung Tablet are frustrating because we rely on it so much for work, play, and everything in between. When our Samsung Tablet stops working, it can throw a wrench into our day and leave us feeling helpless. Possible causes of your Samsung Tablet’s inability to power on or charge include a faulty charger, a broken cable, a dead battery, or faulty software. By understanding these typical triggers, we may more precisely identify the issue and work toward a workable resolution. Check out this article on how to fix it. Enjoy the ride!

Samsung Tablet won’t Turn On

“Samsung Tablet won’t turn on” can have a few causes, but none of them are very serious or intractable. Now, let’s briefly review the most compelling arguments:

  • Hardware failures occur when the Samsung Tablet sustains physical harm. (Is it possible to retrieve information from a broken Samsung screen?)
  • The battery life of your Samsung Tablet has dropped to an unsafe level.
  • The battery is virtually useless, and it is no longer possible to charge it.
  • The screen has gone black and the device is stuck.
  • Due to software issues, the tablet cannot be turned off.
  • There’s a problem with the device’s button.

How to Fix a Samsung Tablet That Won’t Turn On

You need assistance because your Samsung Tablet won’t turn on. Here is how to fix a Samsung Tablet:

Use these troubleshooting steps if your Samsung Galaxy Tab is having power issues. Be sure to try the solutions one by one and see if that resolves the problem.

#1. Charge Your Samsung Tablet

If your Samsung Tablet won’t turn on, the first thing you should do is make sure it is getting electricity. Connect the device to a power source using the included charging wire, and leave it plugged in for at least 30 minutes. Watch for the charging icon or any indications that the device is turning on while it is charging. Your tablet may be unresponsive because its battery has run out of juice. The solution is to charge the device so that the battery has enough juice to turn it on. If the tablet’s battery was the problem, charging should cause the tablet to turn on or at least activate the charging indicator.

#2. Check the Charger and the Charging Port

The hardware, including the charger, the charging cable, and the charging port, should be checked when the Samsung tablet won’t turn on. Is the charging block and cord in good condition? Is the cable’s endpoint crooked? You should get a new charger and cord if the old ones are worn out. Please try using a different charger or cord to see if the issue is resolved, and if there is no obvious physical damage. Using this procedure, the faulty piece of hardware can be isolated. If it doesn’t work, make sure there isn’t any debris blocking the charging connector on your tablet.

Your charging cable may not make contact with the charging contacts if there are extraneous objects inside your charging port. If this happens, power down your tablet and give the charging port a soft blow to clear it out. Please have a professional clean the tablet if you are unable to remove the debris, as doing so may damage the charging port.

#3. Soft Reset

If your Samsung Tablet won’t turn on, a factory reset may be able to resolve any software-related issues. You can perform either a soft reset or a hard reset.

To perform a soft reset, please follow these steps:

  • For around 10 to 15 seconds, press and hold the power button.
  • Don’t let go of the button until you see the Samsung logo.
  • A soft reset will be performed if the power button is released now.
  • This usually fixes the tablet and brings it back to life by clearing any temporary software issues.

#4. Restart to Safe Mode

You may want to see if a rogue app is to blame if your Samsung Tablet still won’t boot up. Make an effort to restart in safe mode. If you are able to boot your Samsung Tablet into safe mode, the issue is likely to be with an app. Here’s how it’s done:

  • To power down your Android device, hold the Power button down for a few seconds.
  • To force a restart, press and hold the Power button for a few seconds.
  • As soon as the boot screen appears, press and hold the Volume Down button. When Safe Mode has started on your Android device, you can release the button.
  • Then, if the “Samsung tablet won’t turn on” problem still persists, you can try erasing the app from your device.

#5. Factory Reset

You can try a hard reset, also called a factory reset, if a soft reset or restart in safe mode doesn’t work. Keep in mind that resetting your tablet to factory settings will delete everything on it, so it’s essential that you make a backup of your data first.

Here are the measures to take in order to reset your Samsung Tablet to factory settings:

  • If your tablet has several users, the first step in resetting it to factory settings is to log in to the main account.
  • Then, navigate to the Settings menu and look for “Factory data reset.” 
  • After reading the supplied details, confirm the reset by hitting the “Reset” button.
  • You’ll need to enter your security password and any other account information prompted if your device has a lock screen. It’s also a good idea to double-check the security of any accounts you use with the gadget.
  • Now, select “Delete all” to wipe your tablet clean of all your information. It could take a few minutes for this to complete, so please be patient.
  • If you’ve already tried those solutions and the problem persists, it’s time to contact Samsung Support or an authorized service center.

#6. Verify the Battery’s Health

“My Samsung tablet won’t turn on; the charging process is painfully slow or impossible to complete.” Well, if your phone doesn’t have a battery icon or a light, it could be dead or the buttons could be loose. (Can I restore a dead Android by flashing it?) If the battery can be removed, do so, and examine the terminals. The next step is to use a cleanser on the corrosion and a clean, dry, soft cloth to remove the particles. Put the phone’s battery back in its original location.

#7. Run a Power Cycle

If your phone has a replaceable battery, remove it, wait a few seconds, and then replace it.

  • For many seconds, press and hold the “Power” button on nonremovable battery devices. Some brands require holding it in for up to 30 seconds.
  • Once you’ve got everything hooked up, leave the charger alone for four or five hours.

#8. Errors can be checked with a computer.

A computer can do more for an Android device than just manage content and charge the battery. What happens is this:

  • Use the USB cable to link your Samsung Tab to your computer.
  • Put it on a 15-minute charge.
  • Cut the wire connecting the gadget to the computer.
  • After around 5 seconds, you should reconnect the cord.
  • Please allow an additional half an hour for charging.
  • For roughly 5 seconds, press and hold the “Power” button.
  • If the “Restart” icon shows on the screen, select it; otherwise, press and hold the “Power” button for 30 seconds once again.

#9. Check for hardware damage

Have you dropped your Samsung Tablet and it won’t turn on? If that’s the case, it’s likely that you’ve accidentally cracked or otherwise damaged your gadget. Therefore, you should take your device to an authorized Samsung service center for maintenance.

#10. Get Rid of the Cache Partition

If your Samsung Samsung Tablet won’t turn on, you can solve it by booting into recovery mode and selecting to delete the cache sector. This is a quick reference:

  • Start by turning off your Samsung Tablet and holding the “Power,” “Home,” and “Volume Up” buttons at the same time.
  • If you’re lucky, the Recovery Mode screen will appear immediately.
  • To clear the system cache, use the “wipe cache partition” option.

#11. Use the Device Maintenance Feature

You may check in on the status of your device and see how it’s doing with the help of the Device Maintenance function. It may also be used to decrease RAM on Android/Samsung devices, which speeds up the device.

  • Access the Samsung Tablet’s “Settings” menu.
  • The “Device maintenance” option should be selected.
  • Use all of your device’s settings to their full potential.
Read Also: WHY WON’T MY PS4 TURN ON: Reasons Why & Possible Fixes

Why won’t My Samsung Tablet Charge? 5 Suggestions to Repair the Situation

Troubleshooting will help you find the cause of your Samsung Tablet not charging so you can get it working again. If your tablet is giving you trouble, try restarting it to see if it helps. If that doesn’t work, try the procedures for fixing it below:

#1. Verify the Cord, Charger, and Wall Outlet

Try a different appliance or outlet to see if the problem persists before calling a professional. Check for frayed wires or bent connectors on the charger and USB cable, as they may prevent the tablet from charging even if the outlet does. Alternate chargers and USB cables, if compatible with your tablet model, might be used to troubleshoot charging and connectivity issues.

#2. Verify the Power Input

If the charging port on your Samsung tablet becomes clogged with dirt, lint, or other debris, it will no longer charge. To clean it without damaging the port, use a soft brush or compressed air. After that, try charging your tablet again to see if it still has the same issue. The charger-to-tablet connection can be disrupted by a dirty charging connector.

#3. Water Damage Must be Checked

Wetness can interfere with your tablet’s charging capabilities. Water damage can be detected by looking for rust or other signs of liquid in the charging port. Electronics that become wet often have trouble charging properly and may experience other electrical issues. Other methods exist to confirm water damage as well.

Here are several ways to look for signs of water damage:

  • First, make sure your Samsung tablet is turned off.
  • The MicroSD card slot or SIM card tray is located on the top left or bottom right of the device, respectively.
  • The tray can be accessed by inserting a SIM card removal tool or a thin pin into a tiny hole on its side. Apply a small amount of pressure and the tray should release.
  • Make sure there isn’t a black dot blocking the tray port. Water damage is represented by a pink or red dot.
  • If you suspect water damage to your tablet, it’s best to take it to a repair shop for a thorough examination.

#4. Install Software Updates

Make sure you have the most recent software update installed on your Samsung tablet to resolve any charging issues. To check for available updates, open the Settings menu, then click Software Update.

If there are any updates available, apply them and see whether the charge issue persists. Keep in mind that bug fixes and enhanced charging performance are common outcomes of software updates for tablets.

#5. Replace the Battery

If your tablet is an older model or has seen a lot of use, its battery may be worn down and unable to charge properly. If that’s the case, you should probably replace the battery. However, changing the battery is an involved technical process that is best left to a professional or certified repair shop. The right battery for your tablet model will be provided, and it will be installed properly.

Contact Samsung’s Customer Support

If your Samsung tablet still won’t charge after attempting the aforementioned troubleshooting steps, you should probably contact a specialist. To have your tablet checked out by qualified professionals, you can call Samsung Support or go to an official service center. They know how to identify and correct even the most complicated charge issues.

It is recommended that you check the user manual or contact Samsung Support for model-specific instructions in order to successfully troubleshoot the charging issue on your Samsung tablet, as the troubleshooting methods may vary significantly depending on the tablet’s model and software version. If you follow these steps, you should be able to fix the problem and have your device working normally again.

Why Won’t My Samsung Tablet Charge or Turn on?

A broken or malfunctioning cable, charging block, charger cable, or adapter is the most common cause of a Samsung tablet not charging. The charging port was clogged with dirt or debris. The charging process was interrupted by a third-party app.

If Your Tablet Won’t Power on or Charge, What Do You Do to Fix It?

Check the power source, clean the charging port, test a new charging cable and adapter, conduct a hard reset, and connect the tablet to a computer if it still won’t switch on or charge. If these solutions don’t work, you’ll need to get in touch with the manufacturer or go to a certified repair location.

How Do You Unfreeze a Samsung Tablet That Won’t Turn On?

The gadget must be restarted if it becomes unresponsive. For longer than 7 seconds, simultaneously press and hold the Power and Volume Down buttons until the device reboots. Press and hold the Power button for up to two minutes to force the gadget to turn off if this doesn’t work.

What Do You Do When Your Samsung Tablet Dies and Won’t Turn On?

A dead Samsung Tablet that won’t charge could be the result of a number of different problems, including a malfunctioning charging cable or adapter, a bad battery, a bug in the tablet’s software or firmware, a malfunctioning charging port, or other internal components. You can try swapping out the cable and adapter, resetting the device to factory settings, or calling an expert for assistance if the problem remains after these steps.

How Do I Turn On My Samsung Tablet without the Power Button?

  • Get ready for power by inserting the adaptor for the charging cord.
  • To do this, hold down both the volume up and down buttons at the same time (on some phones, these are the volume up and down buttons).
  • Connect the phone to the charger and wait around 20 seconds.
  • The device will begin the boot process.

What Do You Do When Your Samsung Tablet Dies and Won’t Turn On?

The following procedures can be attempted if your Samsung tablet has died and won’t turn on: To do a hard reset, plug it into an outlet while holding the power and volume-down buttons for at least 30 minutes. If you still need help after trying these, contact Samsung’s support team or go to a local authorized service center.

How Do You Fix a Samsung Tablet That Won’t Turn On or Charge?

If your Samsung Tablet won’t charge, check the cable and adapter for damage, clean the charging port, try a different cable and adapter, and if the problem persists, contact Samsung’s customer service or visit an authorized service center.

Final Thoughts

Problems like the Samsung Tablet not turning on or charging are unpleasant, but they are usually easy to remedy if you know what you’re doing. Try out the steps to fix a Samsung Tablet that is not turning on. However, if you need more assistance after trying the solutions provided here, please contact Samsung Support or an authorized service center. Also, if one of these solutions helped you, please share it here.

References

0 Shares:
Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like