Water in your Apple Watch could pose a major problem because it often leads to damage or corrosion. Fortunately, there are simple steps you can take to remove the water and prevent further damage. For starters, if your Apple Watch gets wet or is submerged in water, an in-built feature plays a series of sounds through the Watch’s speaker to force water out of the body.
But how do you activate this on your Apple Watch?
Don’t worry; in this post, we’ll go over how to use the Water Lock feature on your watch, as well as other effective methods like shaking and tapping it, drying it with a soft cloth, using silica gel packets for extra moisture absorption, and consulting Apple Support or an authorized repair center if necessary.
Let’s jump right in…
How to Remove Water from an Apple Watch
- To open Control Center, swipe up from the bottom of the screen on your watch face.
- To enable Water Lock, tap the water drop icon. The Water Lock icon appears at the top of the screen to confirm that it is turned on.
- Hold down the Digital Crown on the Watch.
- Turn the Digital Crown instead of pressing it if you’re using watchOS 8 or earlier.
- Holding down the Digital Crown while sounds play through the Apple Watch’s speaker causes water to be ejected.
- When the process is finished, your watch will return to the face, and the Water Lock icon at the top of the screen will be removed.
Note: To eject water from an Apple Watch, you must first enable Water Lock. The water is removed by turning off the Water Lock. Water Lock is a Watch feature that you can activate before swimming or otherwise being in the water with the Watch. It prevents unintentional screen taps while submerged.
How to Disable Water Lock on the Apple Watch to Eject Water
When you finish your shower or swim, you must deactivate the Water Lock to reactivate your display. When you turn off the mode, water is ejected from your Apple Watch. Here’s how to go about it:
- Turn the Apple Watch’s digital crown until the message “Unlocked” appears on the screen. The crown can be turned clockwise or anti-clockwise. It makes no difference.
- The Apple Watch’s speaker will then emit several beeps. This ejects any remaining water from its housing. When this process is finished, you can use your watch normally.
- If any drops are left around the speaker or any other part of the watch, we recommend wiping them away with a clean cloth.
How To Get Water Out Of Apple Watch: Other Methods
#1. Shake or Tap the Apple Watch Gently
This method removes water from the watch’s various crevices by using movement to shake out the water as well as impact force from tapping.
After using the Water Lock feature, you can add another layer of water removal by:
- Gently shake the Apple Watch in various directions, being careful not to drop the device.
- Tap the watch against a dry, soft surface, such as a towel or a cushioned area, to force any remaining water out.
#2. Dry the Apple Watch Using a Soft Cloth
Drying the exterior of the Apple Watch is critical to reducing the risk of moisture damage or corrosion, and using a soft cloth to do so prevents scratches on the device.
Follow these steps to dry your Apple Watch:
- Gently press a clean, dry, non-abrasive microfiber cloth against the watch’s screen, buttons, and other external parts with your fingers.
- Use a small circular motion with the cloth to cover every exposed part of the watch.
- Look for any visible water droplets and absorb the moisture with the cloth’s dry areas.
#3. Make Use of Silica Gel Packets
Silica gel packets absorb moisture well and can aid in the extraction of water from the inside of your Apple Watch.
If you have silica gel packets on hand, proceed as follows:
- Put your Apple Watch in a zip-top bag with several silica gel packets.
- Tightly seal the bag and set it aside for 24-48 hours to allow the silica gel to absorb any remaining moisture from the watch.
- After the timer goes off, take the Apple Watch out of the bag and inspect it for signs of water.
If the above steps do not resolve the problem, you must seek professional help to prevent further damage to your Apple Watch.
Follow these steps to contact Apple or an authorized repair center:
- Go to the Apple Support website or call Apple Support.
- Describe the situation and provide any relevant information, such as the model of your Apple Watch.
- Follow any instructions or schedule a repair appointment if necessary, as there may be internal damage that necessitates expert intervention.
Water Resistance of the Apple Watch
The Apple Watch is not waterproof, but it is resistant to water. The amount of resistance varies depending on the Apple Watch model.
- Apple Watch Series 1 and 1st Generation: Water resistance for 30 minutes when submerged up to 1 meter
- Apple Watch Series 2 and Up: Water resistant up to 50 meters
- Apple Watch Ultra: Water-resistant up to 100 meters.
Despite these safeguards, Apple does not recommend diving into the deep end while wearing your Watch. It is not recommended to use the Apple Watch Series 1 or 1st Generation in water.
The Series 2 and up models are only recommended for shallow-water swimming, according to the company. According to Apple, the Apple Watch Ultra is the only model that can be used for deep-water or high-water-volume activities such as scuba diving or water skiing.
How do I activate Theater Mode on my Apple Watch?
Swipe up from the bottom of the Apple Watch screen to access the Control Center. Tap on the theater masks now. This prevents the phone from turning on when you raise your arm. You must tap the screen to activate this setting and then turn it off. Tap the same masks again to make the screen of your Apple Watch light up when you raise your arm.
How do I enable Do Not Disturb mode on an Apple Watch?
Swipe up from the bottom of the screen on the Apple Watch. Select the Moon icon. This disables all notifications while this feature is enabled. To turn off Do Not Disturb, repeat the steps used to enable it.
Is the water resistance of my Apple Watch jeopardized if I don’t use a Water Lock?
No. Whether this software setting is enabled or disabled, the Apple Watch’s 50-meter water resistance rating is unaffected. However, if you disable Water Lock, your Apple Watch will be unable to prevent accidental touches. You will also be unable to eject water from the speaker unless the Water Lock is enabled and disabled as described above.
Should I use the Water Lock even when I shower?
Yes. Ideally, you should use this setting whenever the watch might get wet. However, Apple advises users not to expose their Apple Watches to soap or soapy water, as this may affect the device’s water resistance. In our opinion, you should charge your watch during your shower.
Is Water Lock mode available on all Apple Watches?
No. Water resistance on the Apple Watch Series 1 and earlier is only IPX7. They can withstand splashes but not submersion. These speakers do not support Water Lock mode and do not eject water. In this case, Apple suggests laying the device on its speaker side to allow any excess water to drain.
What should you do if your Apple Watch gets wet by accident?
If your Apple Watch gets wet accidentally, quickly wipe it dry with a non-abrasive, lint-free cloth. Then, determine whether you have the water-resistant series. Use the Water Eject Mode if it’s water-resistant. If not, please contact Apple Support for assistance.
Can you swim or shower while wearing an Apple Watch?
Water resistance for the Apple Watch Series 2, 3, 4, 5, 6, and SE is up to 50 meters, making it suitable for shallow-water activities such as swimming. However, because the first-generation Apple Watch, also known as Series 0 and Series 1, does not have the same level of water resistance, it is not recommended for swimming or showering.
How do you keep your Apple Watch safe from water damage?
Remember to enable the Water Eject Mode before engaging in water-based activities to protect your Apple Watch from water damage. Inspect the device on a regular basis for damage, such as cracks in the glass or case, which could compromise its water resistance. Also, keep your watch away from soaps, shampoos, and other liquids that can harm the seals and acoustic membranes.
Is it possible that the water will damage the Apple Watch’s speaker or microphone?
Although the Apple Watch is water-resistant, prolonged exposure to water can damage its speaker and microphone. It is always recommended to use Water Eject Mode after being exposed to liquid to expel any residual water. Be mindful of the types of water your watch comes into contact with, such as chlorinated pools or salt water, as they may affect overall performance and water resistance.
Conclusion
You can easily remove water from your Apple Watch if you follow the right steps. Begin by ejecting any water from the speaker using the Water Lock feature, and then gently shaking or tapping it to remove any remaining moisture. After that, dry off all external parts with a soft cloth before placing it in a sealable bag with silica gel packets for 24-48 hours if necessary. If none of these solutions work, contact Apple Support or an authorized repair facility for assistance.
- Can I Swim With My Apple Watch? All You Should Know
- How to Remove Apple Watch From Account: Detailed Guide
- TOP 11 BEST OUTFIT GENERATOR APPS IN 2023
- Can I Swim With My Apple Watch? All You Should Know
- Can I Shower With My Apple Watch: What You Should Know
References
