{"id":9095,"date":"2023-09-23T20:49:12","date_gmt":"2023-09-23T20:49:12","guid":{"rendered":"https:\/\/businessyield.com\/tech\/?p=9095"},"modified":"2023-09-23T20:49:14","modified_gmt":"2023-09-23T20:49:14","slug":"how-to-loop-powerpoint","status":"publish","type":"post","link":"https:\/\/businessyield.com\/tech\/how-to\/how-to-loop-powerpoint\/","title":{"rendered":"HOW TO LOOP POWERPOINT: Explained!","gt_translate_keys":[{"key":"rendered","format":"text"}]},"content":{"rendered":"

The ability to speak in front of an audience is not innate in every person. Personally, presenting a PowerPoint in front of a group can feel like a fright. You can make the nightmare more bearable by setting the PowerPoint to loop while you kick back and watch the slides automatically advance. Making a looping presentation in PowerPoint is a breeze. Each slide in a looping slideshow will be shown for a predetermined amount of time. When that timer expires, the slide automatically advances to the following slide. When the slideshow is finished, it starts over from the beginning. There are only a few simple steps involved if you want to learn how to loop a PowerPoint presentation. Let’s dissect this thing!<\/p>

How to Loop PowerPoint <\/strong><\/span><\/h2>

A PowerPoint presentation will basically advance from one slide to the next when requested. To progress to the next slide, a presenter must hit the arrow key on the computer keyboard, right-click on the mouse, or press the button on a hand-held presentation remote. When you loop a PowerPoint presentation, you tell it to go from one slide to the next without being prompted. This implies that presenters do not need to use the arrow keys on the computer or a mouse. PowerPoint looping allows you to display each slide automatically for a specific period of time. When the slide has been displayed for the specified amount of time, the following slide nonetheless appears automatically. The slideshow then begins further after the final slide of the presentation. To loop a PowerPoint, do these:<\/p>

1. Start up your PowerPoint presentation.<\/p>

2. Proceed to the [Slide Show] tab > Click “Set Up Slide Show” in the “Set Up” group.<\/p>

3. Check “Loop continuously until ‘Esc'” in the “Show options” section of the resulting dialogue box > Select [OK].<\/p>

4. Click your first slide from the “Slides” preview side panel > Hold down [Shift] and click your last slide. This will evidently choose every slide in your presentation.<\/p>

5. Go to the [Transitions] tab > Uncheck “On Mouse Click” and check “After” in the “Timing” category.<\/p>

6. To change the time each slide appears, use the up and down arrows in the “After:” section within the “Timing” group. When you reach the last slide in your slideshow, it will automatically loop back to the beginning.<\/p>

How to Loop PowerPoint Slide <\/strong><\/span><\/h2>

If you’ve created a Microsoft PowerPoint presentation that will be viewed repeatedly, such as on a portable screen or in a museum exhibit, you can change the settings in PowerPoint so that your slideshow “loops” rather than ending after one viewing. It is simple to make a PowerPoint presentation loop. You must explicitly enable looping in the “Set Up Slide Show” menu to loop a PowerPoint slideshow. When you configure your PowerPoint to loop, it will automatically restart from the beginning when the last slide is played.<\/p>

1. Start by opening the Microsoft PowerPoint presentation you want to loop.<\/p>

2. With your PowerPoint presentation open, go to the “Slide Show” menu and then “Set Up Slide Show.” <\/p>

3. In the resulting pop-up window, click the box next to “Loop continuously until ‘Esc'” until a small check mark appears inside the box. Additionally, you may also change any other settings in this section. When you’re finished, press the “OK” button.<\/p>

4. In the Slide Show menu, click the “From Beginning” or “Play From Start” button to see if your PowerPoint can effectively loop. Continue to scroll through the slideshow until you reach the conclusion. When your PowerPoint reaches the final slide, it should consequently restart from the beginning. When you’re sure looping is enabled and you’re ready to exit the slide presentation, use the Esc key.<\/p>

To put it differently, to loop PowerPoint Slide, do the following:<\/p>